刀削面机器人的正确使用方法! - 刀削面加盟多少钱

当前位置:首页 > 新闻中心 > 公司新闻 >
联系人:王老师 电话:0531-87997737
13153117818(同微信)
全国热线:4007918770 地址:山东省济南市历山北路黄台宾馆北30M 网址:http://www.wangshiren.com
刀削面机器人的正确使用方法!
来源:http://www.wangshiren.com/添加时间:2019-01-21 14:23:58
全自动刀削面机器人的正确操作方法都有哪些呢?现在市场上有很多种生产刀削面的机器,但是因为性能的不同,所以产生的价钱也是不同的,今天刀削面加盟店小编就给大家详细介绍下全自动刀削面机器人的正确使用方法。
  What are the correct operation methods of the automatic knife-cutting robot? Now there are many kinds of machines on the market, but because of the different performance, the price is also different. Today, the knife-cutting franchise will give you a detailed introduction of the correct use of automatic knife-cutting robot.
  我们需要将机器的电源连接到插座上面,并且将机器的上升按钮启动起来,然后的是全自动刀削面机器人的右臂在较高的地方停下来。
  We need to connect the power of the machine to the socket and start the up button of the machine. Then the right arm of the fully automatic face-cutting robot stops at a higher position.
  将我们事先已经活好的面团捏成月牙形之后放到全自动刀削面机器人的左臂的托面板上面,并且一定要使得面团和面板紧紧的黏在一起,避免出现落地的情况。
  Knead the dough into crescent shape and place it on the bracket panel of the left arm of the automatic knife-cutter robot. Make sure that the dough and the panel stick together tightly to avoid landing.
  这个时候需要按一下机器的下降按钮,然后将持有刀片的右臂降下来在距离面团0.5毫米的时候在停下来,然后将机器人的削面按钮启动,这个时候机器人就可以削面了。
刀削面加盟
  At this time, you need to press the down button of the machine, then drop the right arm holding the blade down and stop when it is 0.5 mm away from the dough, then start the robot's face-cutting button, then the robot can face-cutting.
  我们在调节碗的大小的时候是需要根据削面的数量来调整的,如果我们需要三大碗的刀削面的话,那么我们可以将大碗设置成为3,然后在按一下f1键机器就会正常的生产了。
  We need to adjust the size of the bowl according to the number of noodles. If we need three big bowls of noodles, then we can set the big bowl to 3, then press the F1 button and the machine will produce normally.
  刀削面的厚度和碗的大小的调整都是根据客户的要求自己来调整的,想要生产出宽的刀削面,就需要将螺丝往外面调整,螺丝向里面调整是将刀削面变细,这些也是根据客户的要求来调整的。
  The thickness of the cutter face and the size of the bowl are adjusted according to the customer's requirements. If you want to produce a wide cutter face, you need to adjust the screw to the outside, and the screw to the inside is to fine the cutter face. These are also adjusted according to the customer's requirements.
  以上就是刀削面机器人的使用方法,更多有关刀削面加盟的相关资讯可以点击我们的官网进行咨询:http://www.wangshiren.com
  The above is how to use the knife-cutter robot. For more information about the knife-cutter joining, please click on our website to consult: http://www.wangshiren.com.
在线咨询 二维码 二维码